N.C. Siax 80

The controller of the Linear Winder is a sturdy industrial CN-Control, with a RUFF developed Software.The winding programs will be created in winding steps. The controller can handle csv-files, so for example, very long programs can be written in Excel and load it in the machine.A network connection of the machine to a computer is also possible, for send and up load of winding programs.All RUFF Linear Winders have the same controller, this has the advantage: one operator can handle all machine sizes from small bench top model up to heavy duty floor winder. Further the machine has 5 free programmable out-/ inputs for external devices if needed for your application, these can be activated or deactivated in each sequence.

N.C. Siax 80 Ruff Dedicated Software

  • Operating panel – 5.7″ Touch screen display LCD STN ¼ VGA B/W
  • Interpolation – Linear and circular
  • Modem – Remote control by internet
  • Increm. encoders – 5/12 V Push Pull/Line driver 450KHz
  • Inputs – 16
  • Outputs – 16
  • Analogic inputs –  2×12 bit 5 V
  • Analogic outputs –  12 bit +/- 10V
  • Protection –  IP65
  • Serial Lines –  2 line RS232, Front USB-socket (optional)
  • Can open –  1 Can open line to control the motors